Continuing quest

It's late and I'm tired. Here is most recent shots of progress on radio TX and Arduino RX . This is more for my game project for the locating device but the things i have learned working on it apply to the mood broadcaster that I am working on as well. I modified another example I read in which the person used a 555 timer and potentiometer to blink an LED w/o an MCU or any other device. It was my hope that instead of the output timer of the 555 timer leading to an anode of an LED i would instead hook it to the data pin of the TX. I could than theoretically use the potentiometer to input values to the 555 and continually "blink" or broadcast that specific value out. The arduino with the FM receiver hooked to the RX or 0 pin of the microcontoller could than be told to listen for and return only that value or above that is being broadcast from the independent TX circuit.When the value was detected it could turn on the LED (and later scroll text in an LCD), hooked to pin 13 and ground of the MCU. This is my theory or method thus far. SO far i am not sure if its responding correctly or not. RIght now my hunch is that something is still amiss. I believe i need to test it with a 100k ohm Potentiometer as right now I am only using a 10kohm pot.